[schhabria]

Friends ,I have recently acquired a Dart 500 VMC with BT 40 Spindle, I am unable to find the pull stud for the machine, I am not able to find any usable data, Just the part no, Could someone Please help with the drawings or dimensions or image ,Any Help would be appreciated.

[meckardt55]

You can look up FIVES MACHINE and give them the part number of the pull stud it may be in stock.

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

[schhabria]

Thanks a Ton

[gwood]

SchHabria, BT40 tool holder grippers are BLUE Ansi-40 are Black
Call the Cincinnati-Fives Technical Support at 1-859-534-4750. We also handle the Cincinnati parts.
We will need a machine serial number and model Type i.e. "ERO"
Pullstud part numbers are INCH, or METRIC threads by part number.

[schhabria]

SchHabria, BT40 tool holder grippers are BLUE Ansi-40 are Black
Call the Cincinnati-Fives Technical Support at 1-859-534-4750. We also handle the Cincinnati parts.
We will need a machine serial number and model Type i.e. "ERO"
Pullstud part numbers are INCH, or METRIC threads by part number.

Hi Gwood, I am looking for the correct pullstuds, The grippers are fine, The Part no of the metric pull stud we require is 1265672, This is from the Machines Installation manual. The Machine is Cincinnati Dart 500 with Carousel Type ATC ,Fanuc 21i-mb,it is a BT 40 machine and the serial no is 7053-F00-RR0283

[hotrunner]

Hi

After much searching, I found in retention knob supply of correctly pull stud the Part # 171-22A.

regards

[schhabria]

Hi Hotrunner, Please tell me how I can reach you and buy the pull stud, can you please send me image and drawing for reconfirmation, you could WhatsApp me on +919821019218. Thanks