[barter]

Hi all, I need help on the following. I'm trying to set up stock from solid on a mill job. It works fine until the verification. When I start the verification the stock appears in rectangular shape and different size. (See the attached images) What could be wrong? The solid is not imported from another program, and is created in Mastercam.

[Superman]

You need to set the Verify options correctly

in X5, when you select a solid as the stock, you also have to do the same
--> select ops to Verify, --> Verify---> (before running) select Options icon, Select your stock options,

then try running it

[barter]

Yes, that's it! Thanks a lot.

[cadcam]

Supermen,
I forgot in the old versions we had to do that. but when you said it. I was oh ya we had to do more steps. we do not have to do it both places anymore.

[Superman]

Supermen,
I forgot in the old versions we had to do that. but when you said it. I was oh ya we had to do more steps. we do not have to do it both places anymore.

I know.... but he was running X5.... which was a b$tch to get the correct stock into verify