hi,
i have problem in puma 10s cnc lathe machine.
it has no parameters, please help me to get its parameters,
is it possible to restore it from the eproms??
if somebody have them, i will pay for him.
best regards
hi,
i have problem in puma 10s cnc lathe machine.
it has no parameters, please help me to get its parameters,
is it possible to restore it from the eproms??
if somebody have them, i will pay for him.
best regards
Did you check for the Blue Book, inside the electrical cabinet's door?
If it is not there, what is your control model and machine's serial number?
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
Attached is a generic Puma 10 with 0TC control.
It is a STARTING PONT, it is likely that you will need to "tweak" it to get it to function correctly.
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
many thanks my friend. do you think it needs to be entered only, or i need to modify some parameters ?
If you don't know how to enter these, I recommend that you hire a trained technician to do it.
This is the beginning of a LONG PROCESS that needs a skilled CNC Technician to make it work correctly.
"Missing parameters" does not let your machine run, but WRONG PARAMETERS can crash it and damage it.
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
dear friend,
i am engineer, and will be careful, i know how to enter the parameters, will makesure that all the speeds rate are to the minimum and make sure the emergency button is always ready, i will check everything manually, like the distantces , limites, directions, etc ...
if you have more notes or advices please send them to me.
will be appreciated.
best regards
hi, i still have the same problem.
I would recommend hiring a technician, then.
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
...And, you still have a Battery Alarm.
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
I found a "2-axis Generic" parameter list for a 0T control that has many machine models, one of them is a 10S
Hopefully it will help.
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
many many thanks my friend, unfortunatly there is no profescient technicians, i want to work alone to solve it, all what i need is clear instuctions to follow. if you have a complete manual, please send it to follow, best regards
- - - Updated - - -
many many thanks my friend, unfortunately there is no proficient technicians, i want to work alone to solve it, all what i need is clear instuctions to follow. if you have a complete manual, please send it to follow, best regards
I have service manual that I can send out FOR MODERN MACHINES
(These manuals have no part numbers and therefor are free to send. I do not have any for your model.)
The only information available on older machines were provided by the manuals that shipped with the machine.
(These manuals have part numbers and are for sale through your local Doosan Dealer.)
Contact your local Doosan Dealer and provide the Machine model and full Serial# and they can order any or all of the following manuals:
Electrical Diagram
Parts Manual
Operation Manual
Instruction Manual (maintenance)
Safety Procedures (useless, as it is all "common knowledge" with sections on "Don't bypass Safety Devices" and "Don't Leave Hand-Tools Inside the Machine"...)
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
THANKS MY FRIEND,
TODAY I HAVE ENTERED THE SERVO DRIVES PARAMETES AS IT IS DESCRIBED IN THE INSTRUCTION SHEET YOU HAVE SENT, EVERYTHING WAS OKAY, I HAVE NO ERROR REGARDING THE X AND Z DIVES, BUT NOW I FACE PROBLEM, I CAN'T DO THE INSTRUCTIONS FOR SPINDLE BECAUSE I CAN'T DECIDE THE SPINDLE MOTO TYPE BECAUSE IT HAS NO NAMEPLATE, DO YOU KNOW HOW I CAN SOLVE THIS PROBLEM?
BUY THE WAY, DOSSAN COMPANY HAS NO PARAMETES FOR THIS MACHINE, DOSSAN 'ISRAEL' TOLD ME THAT, IF YOU CAN HELP ME MORE, YOU WILL BE APPRECIATED
BEST REGARDS
In the back pocket of the electrical cabinet WAS a document showing all the Fanuc items (I can't pull up a list, because it is not recorded as being sold in the US)
1. Locate this document.
Barring that, these are the only ideas I have:
2. Have someone who has the serial number (whoever sold it originally) get the information from Doosan Korea.
3. Try to find the information from Fanuc, directly. (Maybe if you send pictures and measurements of the spindle motor to someone at Fanuc then they might be able to tell you more.)
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
HI,
I NOTICED THESE PROCEDURES IN THE ATACHED LINK, IS IT POSSIBLE TO RETURN THE PARAMETERS?
http://www.cnczone.com/forums/fanuc/178920-cnc.html
MANY THANKS
If you are referring to the Long procedure posted by nautomation...The procedure would wipe all parameters and cause you to start from nothing.
If the file is corrupted, it would delete all corrupted parameters and allow a fresh start.
I DO NOT recommend doing this unless absolutely necessary.
It is the equivalent of "burning down your house to get rid of a spider".
Even after wiping the parameters, you will still need the correct values to enter.
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
hi my friend,
i got these parameters from dossan korea, i i have entered the motor model and apply the auto set process, i also entered the rest of parameters. i got not ready alarm. now, how can i determine if the problem still in the parameters, since i didn't enter the d030x group.
so, what is the next?
best regards