Re: Need help updrading to torroidal trans
I have rewound or modified a few Toroidal transformers. it is relatively easy to take off or add new windings, but usually the top one is easiest of course.
The 3 wire input is usually 120-240 input.
The mounting bolt normally goes through to chassis, but make sure you do NOT install a wire from the head of the bolt to ground as this creates a shorted turn.
If you want to find out the turns/volt, wind on a simple 10 turns of any wire and measure the voltage for this number.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.