Re: K40 and hardwood
Originally Posted by
jfong
OP this is my focusing jig. It's placed on a couple of 123blocks. Then laser a line on a piece of thin wood. Measure the height where the cut line is the thinnest. That is your ideal focus spot. Mine is 3.3" from the BOTTOM of the laser box.
Thank you, that's helpful.
Spent today working on a commissioned furniture piece, I hope to get back to the laser tomorrow. I went ahead and ordered the air assist, should be here next week. I will use something like your rig there to find the sweet spot.
RECreations by Don - Abilene, TX
http://recreationsbydon.com