Hi All,
Has any one know how to do it??
Thank You
Hi All,
Has any one know how to do it??
Thank You
miki2432
This will get you what you want.
Just remove the G97 "S"CODE AND M13.
I just do a mill path with a tool as wide as the nose radius of my turning tool and there you go!
CHANGE THE OPTIONS TO SPIRAL TO GET A CONSTANT Z STEP OVER
Good Luck~!:cheers:
USE THIS FILE....
Thanks Perfect Circle :cheers:
Can you provide the .NC file for this operation?
Thanks!!
A bit of the code.
There is a ton...
N0101 (TOOL=01 PASS=01)
( MILLING: BEM .031 4F-ROTARY X )
N80 G19 G20 G40 G54 G80 G98
N85 M45
N90 G0 T0101
N100 G0 C10.501
N105 G0 X11.0 Z0.0157 M8
N110 G1 X8.4692 F200.0
N115 X8.4648
N120 X8.4599
N125 X8.4598 Z0.0156
N130 X8.4596 H1.496 F2709.1
N135 X8.4572 Z0.0155 H1.641 F2709.8
N140 X8.4541 H1.641 F2710.7
N145 X8.451 Z0.0154 H1.532 F2711.6
I need encentric progaram cnc swiss lathe tsugami how we can process
I need progaram 4mm rod bar please help me any both need progaram