hello guys, one question please :
there are these 2 lathes : lb3oooex2 osp300 :
... MCW from 2012, windows xp
... MCWY from 2014, windows 7 or 8 ?
if i would buy for the 1st one "load monitor 2", will i be able to install it also on the 2nd ? kindly !
Thread: NC Spec Code Page
Results 21 to 32 of 32
-
01-06-2017, 11:34 AM #21
Member
- Join Date
- Jun 2015
- Posts
- 4154
Re: NC Spec Code Page
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
-
01-06-2017, 11:29 PM #22
Registered
- Join Date
- Apr 2009
- Posts
- 1262
Re: NC Spec Code Page
No, machine software is serial number specific, so you will need to order the option on each machine.
If you have other options such as cycle time reduction, spindle orientation, etc, order them at the same time to reduce the cost by getting them all at once under the same software package "creation".Experience is what you get just after you needed it.
-
01-09-2017, 07:13 AM #23
Member
- Join Date
- Jun 2015
- Posts
- 4154
Re: NC Spec Code Page
thx mr Wizard
there is basic ctr, M18/M19, C axis ... i think to get lm2 and some tailstock ctr codes
please, do you think that i should think of some other accesorie ? kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
-
01-09-2017, 07:25 AM #24
Member
- Join Date
- Aug 2011
- Posts
- 419
Re: NC Spec Code Page
Where is the serial number of the machine being stored? (eprom,disk etc)
Are there any way to change machine serial number?"Imagination is more important than knowledge."
-
01-09-2017, 07:30 AM #25
Member
- Join Date
- Jun 2015
- Posts
- 4154
Re: NC Spec Code Page
hy
Originally Posted by kurmay
this question is for me ? however, i don't know what to say
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
-
05-24-2021, 04:08 PM #26
- Join Date
- May 2021
- Posts
- 25
Re: NC Spec Code Page
hi friend Originally Posted by kurmay
iam try to change the spec code file , but when power on again , it show 955 ALARM-P Spec code : data file 15xxxxxx.
do you why ?
it's OSP-P200 system , please help me .
-
05-25-2021, 02:38 PM #27
- Join Date
- May 2021
- Posts
- 25
Re: NC Spec Code Page
hi friend
i have change the spec code file , and power on , but it have alarm : 955 ALARM-P spec code : data file 1515xxxx
can you help me ? it's OSP-P200 system .
-
05-26-2021, 05:07 AM #28
Registered
- Join Date
- Apr 2009
- Posts
- 1262
Re: NC Spec Code Page
Why is this showing up? Nothing posted here since 2016?
Experience is what you get just after you needed it.
-
05-26-2021, 07:30 AM #29
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: NC Spec Code Page
Test Post
Jim Dawson
Sandy, Oregon, USA
-
01-11-2022, 01:14 PM #30
Member
- Join Date
- Aug 2011
- Posts
- 419
Re: NC Spec Code Page
Ping
"Imagination is more important than knowledge."
-
01-13-2022, 07:53 PM #31
- Join Date
- May 2021
- Posts
- 11
I can offer a lot Okuma NC Specification Code and osp software?My email address? Originally Posted by kurmay
[email protected]?Please contact me
-
01-14-2022, 04:06 PM #32
- Join Date
- May 2021
- Posts
- 11
Re: NC Spec Code Page
I can offer a lot NC Specification Code and osp software
I can provide a lot of technical support
Email [email protected]
Better if you can use WeChat
My WeChat ID xin_men
Reply With Quote
Similar Threads
-
Computer Spec?
By TURNER in forum OneCNCReplies: 1Last Post: 02-08-2011, 05:55 AM -
Heidenhain (or anything else!) nc code spec
By kefex in forum G-Code ProgramingReplies: 1Last Post: 07-02-2007, 06:42 AM -
Arrow, Page Up & Page Down Keys - Rhino Video Tutorial
By Robert Schutz in forum Rhino 3DReplies: 0Last Post: 04-25-2006, 04:09 PM -
NC reading tool length from offset page, not data page..?
By RMagnusson in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 03-21-2006, 11:07 PM -
Need to know the spec. of this stepper
By CrazyRonny in forum CNC Machine Related ElectronicsReplies: 0Last Post: 05-27-2004, 04:28 AM
Tags for this Thread
Posting Permissions
