Can anyone recommend a US supplier for timing belts and pulleys with reasonable prices? Anything I should look for in particular?
Thanks
Adam
Can anyone recommend a US supplier for timing belts and pulleys with reasonable prices? Anything I should look for in particular?
Thanks
Adam
B&B Manufacturing.
That would probably depend on the specific application. Belts and pulleys are used for many different things.Anything I should look for in particular?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks Gerry,
Using them to drive ballscrews from my stepper motors (570oz)
Are you reducing/increasing the speed, or just transferring motion? If you use it to reduce speed, in hopes of getting more torque, you're going to be disappointed, since steppers have less torque the faster they run. If you're trying to increase the speed this way, you lose resolution. If all you're doing is transferring motion, you can do that easier with spider-type couplings.
Thanks Andrew. I'm not looking to change any ratios, just fold the system on itself so I can align the steppers parallel to the ballscrews and not have them sticking out from the machine.
Try SDP/SI.
I've bought lots of belts and pulleys from them.
Small Mechanical Components: Precision Gears, Gear Assemblies, Timing Belts, Timing Belt Pulleys and Couplings - SDP/SI
Dyna Mechtronics DM4400, Bridgeport Discovery 300, HAAS VF-0E, HAAS VF-2D
BobCad 16, 20, 24 and now V25
I get mine from a visit to a local bearing supply house, they often either carry them or can bring them in from their supplier.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.