I took the time to model and create the CAM to machine soft jaws for the Tormach SL15 3 jaw chuck and would be happy to share if there is an interest.
David
I took the time to model and create the CAM to machine soft jaws for the Tormach SL15 3 jaw chuck and would be happy to share if there is an interest.
David
post it over on the fusion forum under cam there are a few user over there that would like it
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
I would like to have a copy of it.
Thanks
OK here you guys go. You can download a Fusion 360 file, or export in several different formats if not using Fusion 360 Fusion ~ A360 Soft Jaw Download Link
Please let me know if this works for you.
David
Thanks - I will probably be trying Fusion 360 for a trial, especially with the lathe, so this should be handy.