Hi guys,
I'm having a problem opening a .LAD file that was extracted from a 32i Model B control. Fanuc Ladder III v5.7 keep saying PMC type is not supported.
The machine is a Eurotech 735sl Y that was built approx. around 2012. I saved the back to a USB drive from the control and named it 1000.LAD.
Any help is much appreciated. Thanks in advance.
Results 1 to 20 of 20
Threaded View
-
07-01-2016, 06:29 PM #1
Registered
- Join Date
- Feb 2005
- Posts
- 19
Need help opening a .LAD file with Fanuc Ladder III.
Reply With QuoteSimilar Threads
-
Fanuc 6T PC model B ROM file to ladder
By tuanpq in forum FanucReplies: 4Last Post: 07-22-2020, 11:40 PM -
Need Fanuc 0M-B Ladder File
By Third-Gen in forum FanucReplies: 16Last Post: 10-03-2015, 05:22 PM -
Load back Ladder backup with .#EX file extension in Fanuc 16M
By botha.y in forum FanucReplies: 13Last Post: 02-05-2014, 04:05 PM -
stp file not opening
By Forrest C in forum SolidworksReplies: 8Last Post: 01-20-2013, 04:42 PM -
Opening a .dwg file ??
By AirChunk in forum BobCad-CamReplies: 3Last Post: 09-22-2010, 02:35 AM
Tags for this Thread
Posting Permissions
