It's a small yet very heavy, 3 axis CNC machine. Label says it's a Kaba-keycut, BK01.08.041 made 22.05.1995

The spindle takes ER16 collets and behind the spindle is either a Z axis height probe or an engraving/marking point. It has a tiny, specialized, lever action vise mounted to the table, looks like it could be used to hold some kind of lock key that's cut on the sides instead of the edges. Next to or possibly part of the vise is a small, depressable button and there's a wire leading off from near there. All that appears to be removable from the table so other fixtures could be used.

There's only one connector port anywhere on it, D-sub style but not 9 or 25 pin. Would be nice to find a manual or at least a pinout for the connector. If it's some flavor of serial it should be possible to operate it with Linux CNC.

Have a look at the pictures... it's yet another thing that I've found nothing on with web searches because they insist on ignoring or modifying some of the words and 'helpfully' finding things that are in no way, shape or form *this* thing or the company that made or put their name on it.