Hello, everyone, so i am in this project excersise and i have to make the holes in this v12 block for the pistons, from the one side, right one, everything worked cool. On the other side when i tried to copy paste the operations the orientations is just opposite wrong. I tried several things limit angle or try to set an approach point with no luck. Let me show you what i mean:
https://postimg.org/image/mfhz5cg7r/
https://postimg.org/image/huvsqewif/
https://postimg.org/image/ws49rf9qv/
https://postimg.org/image/qsginroyf/
https://postimg.org/image/6md0ovtav/
https://postimg.org/image/wj6p1hwyf/
https://postimg.org/image/7sh0nohlj/
https://postimg.org/image/3ys5s9pnb/
https://postimg.org/image/cjlhjfztj/



Here is a gif too:

http://gph.is/2a8yT0q



I tried to limit the angle but then i get the well know message: the tool need another axis of rotation

I believe there is a simple value i have to change but 2 days now i haven't been able to find a solution. I just have to somehow change the tool to opposite direction.

Looking forward your answers!

Thanks in advance!