Hi everyone, when I installed rdworks, I installed first the "laserwork" mode and then "corel" mode, to have the option to launch RDWorks from my own hand and from coreldraw inside too
But, when I play with the archives of languaje (see my other post, wrong placed in general) i discover two installation of rdworks...
- C:\RDWorksV8
- C:\Program Files (x86)\Corel\CorelDRAW Graphics Suite x6\Programs\RDWorksV8
(I have coreldraw X6 installed, but the paths are similar to every coreldraw)
In this case, when I modified the language archives, for example, I need to modify two installations.
Well, I start to try some ideas... I deleted the C:\RDWorksV8
And create a shortcut in desktop from C:\Program Files (x86)\Corel\CorelDRAW Graphics Suite x6\Programs\RDWorksV8
Dont work, the program start but then some errors appear, maybe archive permissions ... I try other thing
There is the solution :
First install "corel" mode
Then choose "laserwork" mode, BUT before press INSTALL, press LOCATE PATH, (a explorer windows brings up) find C:\Program Files (x86)\Corel\CorelDRAW Graphics Suite x6\Programs\ and press INSTALL
NOTE the path finish with PROGRAMS not with RDWorks, if you select path with RDWorks included, you get a duplicated installation inside coreldraw directory ...
Right now ruida release a new version of rdworks (subversion) 8.01.18 (from 8.01.16), and at first view just add the option to control 4 laser tubes...
No corrected offset laser 2...
When you install a new version, do the same procedure, and remember put the laser cutter on, start rdworks, (if are connected via lan, add lan), go to file/vendor settings and press READ, to recover all the parameters
Martín.-