Re: Prolight 3000 CNC Turning Center questions
It looks like the boxes are different sizes, but the motor to hub center lines looks to be the same on all of them. But without understanding the system as a whole it's a little difficult to say if they are interchangeable or not. I have never seen a machine like yours so I'm shooting in the dark here. Maybe one requires some kind of a spacer? In any case, any of them would need to be mounted such that the tool tip winds up on the spindle C/L, assuming you don't have a Y axis on your machine. If you do have a Y axis, then you could compensate with an offset.
Jim Dawson
Sandy, Oregon, USA