[1enick72]

I'm looking at the purchase of a 1995 Multicam model 48.I have a little info on the machine but would like to find more, like a spec sheet. It is a 4x8 table but what is cutting area etc.? It has t-lock hold downs and a 1.5hp vacume pump for hold down. I would also need to find the best place to purchase a larger vacume pump. Any help would be great.
Thanks,
Eric

[loyedp]

I'm looking at the purchase of a 1995 Multicam model 48.I have a little info on the machine but would like to find more, like a spec sheet. It is a 4x8 table but what is cutting area etc.? It has t-lock hold downs and a 1.5hp vacume pump for hold down. I would also need to find the best place to purchase a larger vacume pump. Any help would be great.
Thanks,
Eric

hi lenick

i am working in cnc muticam 5000 series machine and please find me a ways to get feed rates and spindle speed for certain materials like aluminium ,wood and acrylic , etc ,i found u r searching for muticam model 48 .if u can find me some help it will be greatful to me