[ruYuri]

hi guys I have original nvem bin, and novosun flash tool, can share it, send me an email 540lab -at- inbox-ru
But I have to say, that I killed my NVEM with attempts of fixing bin problem. It was working fine out of the box, apart outputs, and when I needed them I decided to load EC500.dll plugin as written before by DigitalDream stupid developer, and immidiatly had a bin-file problem.
Throwed nvem to real bin and ordered SmoothStepper (ESS), so wish you the same. I only sorrow about nvmpg, it wasn't that bad, hope to connect it to SmoothStepper.

[BTG]

Hello RuYuri,
Do you have the Firmware for the NOVUSUM NVUM V2 ETHERNET 6 AXES

Do you think it is possible to reactivate the NOUVUSUN controller ??

thank you in advance for your return

[Willytork]

Dear Sir. I'd be grateful for a chance to reinstall the bin file. I first setup this nvem v2 using artsoft mach3 download and had no problems except the tachometer pulse input seemed dead. So I reinstalled mach3 from the disc provide with the nvem v2 . before establishing connect it asked for bin file then no more talking to my computer.
If you're willing and able my email is [email protected] to send me the bin file. My boss thinks I killed his controller. He might be right.
Thank ou,
Bill Phillips

[ruYuri]

hi guys I have original nvem bin, and novosun flash tool, can share it, send me an email 540lab -at- inbox-ru
But I have to say, that I killed my NVEM with attempts of fixing bin problem. It was working fine out of the box, apart outputs, and when I needed them I decided to load EC500.dll plugin as written before by DigitalDream stupid developer, and immidiatly had a bin-file problem.
Throwed nvem to real bin and ordered SmoothStepper (ESS), so wish you the same. I only sorrow about nvmpg, it wasn't that bad, hope to connect it to SmoothStepper.

Hi one more time! I hope this time my link will work
so I can’t guarantee that files are original, they been found at novosun forum time ago, so they are not fresh and so on… And try to avoid of using flash-tool, use it only if mach3 procedure will not work.

https://drive.google.com/file/d/1jO9...ew?usp=sharing

btw I didn't bought ESS that time, because of the thipping time... so I bought chinese EC500... and it works fine so far

[Garcenho]

Hi, Everyone i have a problem with my uc300 digitaldream, after some usb crashes i think about the frequent of inverter, now only give me a usb not recgnized, i check the chip stm32 its normal but the spi flash its empty, i already find a backup for the stm32f207vct6 but without the flash memory the chip stays in error. anyone have this dump from flash?

Tks

[Madkite83]

I have been using one if these for a while. Shame the dev doesn't fix the issues.
I got most working. But 2 things won't.
Backlash basically won't work. It will apply almost infinite acceleration so end up skipping steps. That's because mach3 uses the acceleration time for the mpg for backlash. Which is an odd thing to do anyway.
So the mpg contole and backlash all have instant responses. And the timer setting does nothing on nvem v2.

The other thing I can't get to work at all is the spindel index. I can get the hall effect to work on other inputs but these won't register it spinning. The index input I have tried everything and just can't make it trigger.

No idea what else to do with it now. I have an old PC with parallel and may just go to linux cnc. Getting a mpg connected is the bit that worries me with that however.

Has anyone got a spindle index to work out of this board?

[Mlott]

I have a Richauto controller and swapping out for NVCMV2.1 controller 6 aixs need help with transfer of wiring

[gloveless]

I have a Richauto controller and swapping out for NVCMV2.1 controller 6 aixs need help with transfer of wiring

Could you try to download the firmware for me? I need the .bin file I got one flashed with the wrong bin.

[fintechcom]

Was this bin file for a v2 nvem?