Is it a good idea to connect the Negative (Black) of a DC PSU to the ground point in a control panel where the GND (Green or Copper wire) from the 120VAC is connected?
Thread: Ground Point
Results 1 to 20 of 25
Threaded View
-
08-19-2016, 07:58 PM #1
Member
- Join Date
- May 2009
- Posts
- 1332
Ground Point
Nicolas
Reply With QuoteSimilar Threads
-
Lasercut 5.3 start point and end point not matched and curve line not smooth?
By shizyo in forum Laser Engraving / Cutting Machine General TopicsReplies: 8Last Post: 06-21-2019, 11:26 PM -
Fanuc 18i-TB absolute motor pulscoder zero point shifts itself (floating zero point)
By hp2703 in forum FanucReplies: 5Last Post: 09-25-2013, 05:20 PM -
Frame ground vs. Electrical ground.
By polaraligned in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 11-24-2008, 11:21 PM -
Motor supply ground vs Logic ground?
By Gashmore in forum CNC Machine Related ElectronicsReplies: 11Last Post: 06-07-2005, 11:21 PM
Tags for this Thread
Posting Permissions
