All,
I am trying to Face Tap on a Mori Seiki CL-203B Machine. The machine goes in fine to the -0.625 point and then will not reverse the spindle and feed out.
I get the EX0401 ( G1027) SPINDLE OR ROTARY TOOL SPINDLE ON ALARM.
The section of the program is:
T0808
S150 M03
G00 X0.0 Z0.5
G84 Z-0.625 R-0.1 S150 F0.07692
G00 G80 Z1.0
Any light shed on this will be greatly appreciated. There is no good example of the G84 in the Mori Programming book. This alarm is also not listed.
Thanks
Hutch