[ygorek]

Today I did a test copy of the lid backgammon:

[ygorek]

aarggh



All separately, as you asked.

[aarggh]

aarggh - Your order is ready, here's the result:

All separately, as you asked.
4 stl file is ready to transfer.

Just shot you an email and paypal Ygorek. If you could please make the small change mentioned in the email I'd appreciate it.

cheers, Ian

[CNCMAN172]

Nice looking clock Ygorek

Russ

[ygorek]

Do we know how many models have been downloaded?
Do we know how many of those downloads were just to see what was in the download?
Do we know how many downloads are really being used?

I like admiring the images posted, but I have not downloaded any.

Cheers
Roger

I know how many models are downloaded per day, I follow every download, more than 200 downloads a day, if you are so interested!

Do not download ???, then I see no reason to spread!
I, too, can say a lot of things, but I can do absolutely differently!

It is because of people like you that any desire to do something for people disappears !!!

[saudarkar666]

ygorek forgive, I downloaded several files for personal use only . I do not make money on cnc .Please just change the name of the post with free models to buy to use models because it encourages the downloading without paying

with regards

[planekrazie]

It's not a pay to use. It's a donation. If you like the models send ygorek a tip. It's like going to a restaurant to eat. If you like then you tip good. Just a suggestion


Sent from my iPhone using Tapatalk

[aarggh]

aarggh



All separately, as you asked.

Fantastic work thank you Ygorek! I just did a mock up and they look great!

I can highly recommend your work!

cheers, Ian

[ygorek]

Fantastic work thank you Ygorek! I just did a mock up and they look great!

I can highly recommend your work!

cheers, Ian

Thank you!!!

We are already working on your second order, oval clocks, the result will be sent to you by post.

Did you like the Gift from me?

[aarggh]

Thank you!!!

We are already working on your second order, oval clocks, the result will be sent to you by post.

Did you like the Gift from me?

I did thanks you very much!

cheers, Ian

[aarggh]

Thank you!!!

We are already working on your second order, oval clocks, the result will be sent to you by post.

Did you like the Gift from me?

I shot you an email yesterday Ygorek, did you get it?

cheers, Ian

[ygorek]

I shot you an email yesterday Ygorek, did you get it?

cheers, Ian

I answered you:
After milling it is enough to cut through a hole of the desired diameter under your watch.
Or do you need to make a hole in the model in the owl?

I think it's better to drill a hole later, so that the diameter of the clock will fit.
Otherwise, you can not guess with a diameter, you work through the artkam.

[aarggh]

I answered you:
After milling it is enough to cut through a hole of the desired diameter under your watch.
Or do you need to make a hole in the model in the owl?

I think it's better to drill a hole later, so that the diameter of the clock will fit.
Otherwise, you can not guess with a diameter, you work through the artkam.

Thanks Ygorek, finally just sent a reply, it's been very busy this week.

I've also just glued up some English Oak to machine the dragon clock for my son this weekend, so I should be able to post some pics when done and sanded.

I'm really looking forward to doing that one, thanks again for posting the model!

cheers, Ian

[ygorek]

Thanks Ygorek, finally just sent a reply, it's been very busy this week.

I've also just glued up some English Oak to machine the dragon clock for my son this weekend, so I should be able to post some pics when done and sanded.

I'm really looking forward to doing that one, thanks again for posting the model!

cheers, Ian

Yesterday I did this:

[aarggh]

Yesterday I did this:

Nice work!

That's a good machine you've got there too Ygorek, large work area by the looks!

cheers, Ian

[ygorek]

Nice work!

That's a good machine you've got there too Ygorek, large work area by the looks!

cheers, Ian

Working area 2100 x 1300 x 400 mm.

[ygorek]

I bought for my money more than 100 high-quality models, spent about 100 dollars!
I'm sorry for you to spread!
Help from you will not arrive.
Aarggh is the best user, it's not a pity for him!

[aarggh]

Haven't sanded or oiled it yet, quick pic raw off the machine and I'm pretty happy with the results! Thanks for posting the model Ygorek!

First time I've used European Oak for 3D work, it's an absolute dream to machine, using a 2.5mm ball nose cutter, the timber will barely need any sanding at all!

cheers, Ian

[ecurb5]

Haven't sanded or oiled it yet, quick pic raw off the machine and I'm pretty happy with the results! Thanks for posting the model Ygorek!

First time I've used European Oak for 3D work, it's an absolute dream to machine, using a 2.5mm ball nose cutter, the timber will barely need any sanding at all!

cheers, Ian

Did you run the toolpath with grain or cross grain?

[aarggh]

Did you run the toolpath with grain or cross grain?

Sent from my Pixel XL using Tapatalk

Because this oak isn't stringy to machine I did it along the grain for the roughing and finish passes.

When I do Tas Oak/Vic Ash I usually do a rough pass at 45 degrees, and then the finish with the grain to break the strings up. With the grain of the EO it's a bit hard to tell, but the finish is super smooth. Should look awesome oiled.

cheers, Ian