Hi, folks,
I have just finished my CNC router, and now come to the conclusion that for milling aluminium (especially soft 1050) oil mist system is a must.
In EU there are a lot of online shops that sell very cheap Chinese HAILEA piston oil-less compressors.
For example ACO-318, 60 L/min, 0.02 MPa.
There are others, more powerful models from the same manufacturer if necessary.
http://www.hailea.com/e-hailea/product3/ACO-318.htm
I'm going to use it with receiver and automatic on/off pressure sensor.
Is his pump suitable for oil mist system, or I must look for something else?
Thanks in advance for any suggestion(s) !