586,075 active members*
4,360 visitors online*
Register for free
Login

Thread: Mach 3 WITH ESS C62 BOB AND DYN4

Results 1 to 13 of 13
  1. 09-22-2016, 10:13 PM #1
    dynoluc
    dynoluc is offline Registered
    Join Date
    Jun 2016
    Posts
    16

    Mach 3 WITH ESS C62 BOB AND DYN4

    I have the Estop to work on mach3 cant get DYN4 SERVO TO WORK
    I install a jumper wire on the C62 ESTOP PORT
    24 VOLT TO POWER THE C62 BOB AND THE ESS
    I AM NOT SURE FOR THE CONFIGURATION JUMPER TERMINALS ON THE C62 BOB
    I AM NOT SURE FOR THE PORTS AND PIN IN MACH3


    ANY HELP WOULD BE APPRECIATES

    THANKS
    Reply With Quote Reply With Quote
  2. 10-22-2016, 02:55 PM #2
    baxter435
    baxter435 is offline Registered
    Join Date
    Oct 2016
    Posts
    28

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    any luck figuring this out? im in the same boat with a C62, uccnc 300 Ethernet , and dyna 4 drives and motors...documentation almost non existent.
    Reply With Quote Reply With Quote
  3. 10-22-2016, 09:21 PM #3
    dynoluc
    dynoluc is offline Registered
    Join Date
    Jun 2016
    Posts
    16

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    it working with the help of cnc4pc

    what is your problem ?
    mach3 or mach4
    i could send you some picture of my set up
    Reply With Quote Reply With Quote
  4. 10-22-2016, 10:22 PM #4
    baxter435
    baxter435 is offline Registered
    Join Date
    Oct 2016
    Posts
    28

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    im trying to set up uccnc
    Reply With Quote Reply With Quote
  5. 10-24-2016, 06:06 PM #5
    dynoluc
    dynoluc is offline Registered
    Join Date
    Jun 2016
    Posts
    16

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    send me your e mail it wont let me load the pic on the forum
    Reply With Quote Reply With Quote
  6. 10-24-2016, 06:14 PM #6
    dynoluc
    dynoluc is offline Registered
    Join Date
    Jun 2016
    Posts
    16

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    Attachment 337416

    - - - Updated - - -

    Click image for larger version.  Name: IMGP2746.jpg  Views: 5  Size: 106.3 KB  ID: 337418

    - - - Updated - - -

    Click image for larger version.  Name: IMGP2747.jpg  Views: 3  Size: 132.3 KB  ID: 337420

    - - - Updated - - -

    Click image for larger version.  Name: IMGP2748.jpg  Views: 2  Size: 111.6 KB  ID: 337422

    - - - Updated - - -

    Attachment 337424
    Reply With Quote Reply With Quote
  7. 10-24-2016, 06:18 PM #7
    dynoluc
    dynoluc is offline Registered
    Join Date
    Jun 2016
    Posts
    16

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    Click image for larger version.  Name: IMGP2750.jpg  Views: 1  Size: 104.2 KB  ID: 337426

    - - - Updated - - -

    Click image for larger version.  Name: IMGP2751.jpg  Views: 1  Size: 112.6 KB  ID: 337428

    - - - Updated - - -

    Click image for larger version.  Name: IMGP2752.jpg  Views: 1  Size: 103.0 KB  ID: 337430
    Reply With Quote Reply With Quote
  8. 10-24-2016, 06:30 PM #8
    dynoluc
    dynoluc is offline Registered
    Join Date
    Jun 2016
    Posts
    16

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    Click image for larger version.  Name: image003.png  Views: 2  Size: 453.2 KB  ID: 337432

    - - - Updated - - -

    Click image for larger version.  Name: image002.jpg  Views: 3  Size: 72.1 KB  ID: 337434
    Reply With Quote Reply With Quote
  9. 10-24-2016, 10:00 PM #9
    davy182
    davy182 is offline Registered
    Join Date
    Apr 2008
    Posts
    204

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    you should only have 5v to the c62 and ess.
    Reply With Quote Reply With Quote
  10. 10-29-2016, 01:14 PM #10
    baxter435
    baxter435 is offline Registered
    Join Date
    Oct 2016
    Posts
    28

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    thanks for your replies and pictures. cnc4pc sending me a few things to get me going.... im also using uccnc so my operation system is different.
    Reply With Quote Reply With Quote
  11. 10-29-2016, 01:18 PM #11
    baxter435
    baxter435 is offline Registered
    Join Date
    Oct 2016
    Posts
    28

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    are you happy with your set up? any issues?
    Reply With Quote Reply With Quote
  12. 11-03-2016, 03:30 AM #12
    dynoluc
    dynoluc is offline Registered
    Join Date
    Jun 2016
    Posts
    16

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    VERY HAPPY WITH THE SET UP
    Reply With Quote Reply With Quote
  13. 11-15-2016, 01:21 AM #13
    baxter435
    baxter435 is offline Registered
    Join Date
    Oct 2016
    Posts
    28

    Re: Mach 3 WITH ESS C62 BOB AND DYN4

    What part of Canada you from? I'm 15 minutes from Cornwall, Ontario.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Anyone with experience from DYN4 drives and LinuxCNC?
    By nschmidt in forum Dmm Technology
    Replies: 2
    Last Post: 05-29-2019, 06:14 PM
  2. DYN4 enclosure wiring help
    By usmarine21m in forum Dmm Technology
    Replies: 5
    Last Post: 08-29-2016, 04:30 AM
  3. DYN4 wiring
    By dynoluc in forum Dmm Technology
    Replies: 1
    Last Post: 06-05-2016, 03:11 PM
  4. Dyn4 and Arduino rs232 communication
    By JPMach in forum Dmm Technology
    Replies: 6
    Last Post: 08-20-2015, 06:40 PM
  5. DMM DYN4 Enable signal.
    By rob2290 in forum Dmm Technology
    Replies: 7
    Last Post: 06-02-2015, 01:18 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules