We are pretty excited about the new engraver we are bringing to market. It should be out by the middle of next month (Oct 2016)
CNC Engraver with the DeWalt DW660 - Album on Imgur
The E3 CNC Engraver has the following features:
A rigid laser cut frame
SG20U supported rail system
GT2 bet drive on X and Y axis. 5/16-18 dual brass nut on the Z axis
Home switches on all axes
MDF Spoil-board with 1/4-20 threaded inserts
DeWalt DW660 router
The assembled foot print
Length: 24.8" (630 mm)
Width: 25.2" (640 mm)
Height: 18.9" (480 mm)
Assembled Weight: 25 lbs
Cutting Area
X: 17.7" (450 mm)
Y: 15.3" (380 mm)
Z: 3.3" (85 mm)
Gantry clearance is 3.1” (80 mm)
The plan is to keep the cost under $600.