Hi All, thanks for looking at this thread.
I have a 3020 CNC with the JP-382A control board and JP-1482 spindle control.
I have linked the spindle stop / start up between the two boards and its working fine.
The relay that drives the spindle stop / start, what rating is this relay, can I put 12v through it to drive a second relay that will activate the spindle and also a hoover I'm using for chip removal.
My idea is to use 12v from the control board to pass through the board relay and power a second relay which will be double pole one to start the spindle and other to start the hoover.
Has anyone done this and do you think it will work.
Thanks