Hi everyone,
I just became the owner of a Multicam 44 Plus. There was no software and no computer with it. I originally acquired it with the plan to fit a new control system (possibly using a KFlop controller). The owner did not have the machine running, but assured me that it was working when it was removed from a previous shop. After getting it home and having a chance to examine it closer, I would like to try to use the machine as is. Although no computer and software came with it, there was a remote pendant and a control panel that must have attached to the machine. All components inside the electrical cabinet look to be in good shape. It also has a vacuum table installed. It has a 4 hp spindle. I have 3 phase power available via rotophase that I use for my machine shop. I have not connected the machine to power yet and do not want to until I find a manual for the machine. So here is where I have some questions and need some help:
1. Where can I acquire a manual for this machine? I have downloaded a manual from a MultiCam website, but it appears to be for a much newer machine? A digital copy would be great.
2. I have downloaded MultiCam PSS. Will this allow me to make a connection to the machine if powered up? Does it require a license key or other machine specific files to operate?
Any help would be greatly appreciated.
Thanks,
Russell