[CRP]

Nathan there is a problem with a lot of your vids they are missing one very important rule RULE 1 Fusion 360 R.U.L.E #1 and #2 - Autodesk Community

Hi Daniellyall,

Thanks for the feedback. Rule 1, as you call it, is a good tip, however is intended as a suggestion for parametric designs - less relevant to direct-model designs as most our projects are.

The video (of ours) that demonstrates the parametric Fusion 360 design workflow (the guitar video) which we have a thread on the Autodesk forum if you have any questions regarding the modeling --> Guitar design and manufacture using Fusion 360 and CNC - Autodesk Community. Jeff and I are both active there.

https://youtu.be/TrLUaoIe48A?list=PL...KsZg0wEsVbOgkj

Thanks!

-Nathan