Originally Posted by
dlewis1000
Hey I'm really hoping that someone here can help me out a little bit. I have a mazak M32 control on an H1000. We have Calmotion USB to CNC boxes to transfer our programs to our machines. I am having issues uploading programs. We are using the correct port. Attached is our current wiring diagram for the rj45 to db25 adapter. The machine will send programs from the control to the usb but doesn't seem to take any programs at all.
Heres some of my machine parameters
M32
G1 = 2 (4800 baud for CMT I/O, use CMT DB25 port)
G19 = 2 (4800 baud for TAPE I/O, use PTR/PTP port)
G20 = 3 (2 stop bits)
G21 = 0 (Even parity)
G22 = 0 (Invalidate parity, disable parity check)
G23 = 3 (8 data bits, includes parity in data)
G27 = 0 (CR/LF)
G29 = 3 (DC1 to DC4 which means XON/XOFF)
G30 = 1 (Assignment of parity to DC codes)
G40 = 0 (No DC2/DC4 is output)
G41 = 0 (No leader)
G42 = 600 (60 second wait)
G43 = 00000000 (ISO)
G44 = 0 (No spaces before tape)
G45 = 0 (No spaces between programs)
G48 = 0 (Disable rewind)
G49 = 1 (Load All enabled)
G50 = 00000000 (don't use M02, M30, M99 as end of program)