[AirChunk]

Hello,
I bought this used Puma 10 .
After purchase I found out it had been crashed.
I am now trying to get the turret apart to pull the tapered pins and get it squared back up.
The plate in the pic with the numbers on it I need to pull off.
The pin that went thru this plate and the shaft has been bent and is kinda thu the plate and shaft at a zig zag angle ( du to the shaft sating put and the plate moving)

I have ground / drilled the pin down thru the plate to the shaft.

Any idea the best way to pull the plate off of the shaft ???

Thanks!

[AirChunk]

Nobody ever had one of these apart?

[AirChunk]

I am still searching for any input .