Re: Okuma LB300-M. X axis servo vibrates whit peaks at every 3 mm increment, any idea
i don't know what to say exactly, but if i would hear strange noises, like this, than :
... i would try to be sure if it is the electronics or the mechanics
... let the motor work without load, disengage the turret, and hear it only spiniing the screw
... if same thing, than disengage the screw
add / remove parts from the chain, and locate the problem
i won't say and i wish that there is no paralelism problem
do you have peeks all over between x+ and x -, or only near x+ ?
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg