motionPro is a 3+1 axis CNC controller that can control 4 stepper motors, 3 axis motors + 1 clone axis motor that can be used for X or Y axis. Each motor channel is rated for 2.2A with adequate heatsink (User attachable. Provided in the box). This controller can be controlled using a standard USB port or an optional Bluetooth module (module not included with the controller).
This controller can be bought from here: motionPro 3+1 axis CNC controller with USB and Bluetooth control | eBay.
Here is a quick feature list:
- 3 + 1 clone axis that can replicate either the X or Y axis (useful for machines with two motors for a single axis)
- Capable of driving upto 4 NEMA 23 motors at 2.2A per motor (with a heatsink, 1.5A without any heatsink)
- Full to 1/32 micro-stepping configurable via on board microswitches
- Current limiting options can be set independently for every axis including the clone axis
- Options for user configured inputs and feedback such as E-Stop, Reset, Feed Hold, Cycle Start, Homing Location, and Probing (to precisely adjust Z-axis zero set)
- Accommodates upto 6 limit switches. Limit switches are configurable as active high (normally closed switches) or active low (normally open switches)
- USB port eliminates ancient parallel ports and freedom from older expensive machines that are hard to get
- Bluetooth control (with an optional HC-05 bluetooth module) to wirelessly connect and operate the machine
- Comes with a heatsinks for the motor driver chips
- Uses standard 18-24V DC supply and with 12V at 1A and 5V at 2A outputs on the board
- Reverse power connect protection
- Plenty of visual indicators for debugging
- Comes pre-installed with grbl v0.9j with default settings.
A quick connect guide is included in the box and a comprehensive connection guide is available online here. Watch the controller in action with a laser engraver here.
More images:
If you have any queries about this product, message me here or reply on this thread. Happy machining!