Hello guys! A few months ago i have started to order and obtain parts for building my first CNC machine. After many days of waiting, I managed to have all the necessary parts for the electrical part of the machine.
The parts are:
- a DIY PSU from an old ATX that outputs 24V 12A
- 3 x Nema 17 24V 1.5A 1.8 Deg Stepper motors link -> MINEBEA NEMA 17 STEPPER MOTOR HYBRID 42MM 24V 1.5A
- 1 x Arduino Uno
- 1 x CNC Shield v3.0 from Protoneer link -> Arduino CNC Shield V3.51 - GRBL v0.9 compatible - Uses Pololu Drivers | eBay
- 4 x A4988 Stepper Motor Drivers link-> https://www.pololu.com/product/1182/specs

After wiring all together, I've connected the system to my laptop and sent a G-code to it, but nothing happened.
My question is, can I drive such motors with those drivers? Can I build a CNC machine in this configuration? I

Regards