586,047 active members*
3,859 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > DNC Problems and Solutions > DNC (RMT Operation) on Fanuc 16M - Please Help!

Thread: DNC (RMT Operation) on Fanuc 16M - Please Help!

Results 1 to 2 of 2
  1. 11-16-2016, 07:40 PM #1
    celtsrp33
    celtsrp33 is offline Registered
    Join Date
    Aug 2013
    Posts
    6

    DNC (RMT Operation) on Fanuc 16M - Please Help!

    Hey everyone! I have a Robodrill t10a with Fanuc 16M control. It was setup for DNC operation previous to us having to replace the PSU. Now I have loaded all parameters, etc and tried to get into RMT (remote) mode but cannot get it to get out of MEM mode and into RMT. Can anyone guide me in the right direction here? I've spent a lot of time this week trying to get it to work. FWIW - I can send a program via RS232 from PC to the MEM in the control, but just can't get it to go to RMT. I don't know if there's a parameter I am missing or what here. HELP!

    Thanks in advance.
    Reply With Quote Reply With Quote
  2. 12-31-2016, 11:30 PM #2
    whiteriver
    whiteriver is offline Registered
    Join Date
    Aug 2003
    Posts
    318

    Re: DNC (RMT Operation) on Fanuc 16M - Please Help!

    Did you ever get this working. I have the same problem.

    thanks,
    Donny
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fanuc 6 operation repeat
    By hmc710 in forum Fanuc
    Replies: 2
    Last Post: 05-20-2015, 05:59 PM
  2. Fanuc 6m programming and operation
    By SMW32 in forum Fanuc
    Replies: 6
    Last Post: 03-15-2013, 03:15 PM
  3. Fanuc 11M operation manual in PDF?
    By polarbeer in forum Fanuc
    Replies: 3
    Last Post: 01-20-2012, 01:04 PM
  4. Fanuc 3M DNC operation
    By max_c in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 07-05-2010, 01:11 AM
  5. Need advise on Fanuc 21M or 0-M control operation
    By Barney in forum Fanuc
    Replies: 5
    Last Post: 12-31-2006, 08:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules