[JohnF]

I have a Given GH32 lathe I need some info on. I can't find anything online and have no idea who made these for Given. Given was a machinery dealer many years ago.

JohnF
Phoenix

[waltraud]

I worked for Given a very long time ago in Chicago.
Is there any way you can turn the machine on and see on of the programs/
If you do, email it to me at [email protected]
I will then try yo help you.
Heinz Putz at Fanuc CNC programming training. Learn CNC for Fanuc, Yasnac, Mitsubishi CNC controls, CNC Machining Videos and DVD's, CNC programming training, CNC education,and CNC consulting.

[JohnF]

Sorry, I thot I had responded to your post some time back...
This has been upgraded(?) with a French 3 axis CNC control and the machine heavily modified for use as a spinning machine. The original cabinet is still used and the spindle control (Reliance) is used but axis control is with Fanuc boards and a Fanuc Z axis motor. The cross slide is pinned to the saddle and hydraulic X and Y axis used.
I keep forgetting to bring my fricking camera so I can't post any pics yet.

JohnF