Re: ES-DH2306 Drive with UC300ETH Motion Control Board
Andrew...
I feel your pain. I solder up a few sets of those HD44 connectors a month and they take time. They are, in fact the reason I learned to solder under a magnifying glass. I do not use the enable function as it will not reset the drive, but do use the alarm. Here is a board that went out last week using 6 conductor shielded data cables.
I do recommend using the alarm as I have seen a case where one motor on a dual drive gantry hit an obstacle (user placed) and the rest of the axes kept going.
Gary Campbell CNC Technology & Training
GCnC411 (at) gmail.com www.youtube.com/user/Islaww1/videos