Hi guys! A few days ago I got the lathe Victor fanuc 10m. After switching on the machine there are a lot of errors. By pressing the key combination "Power On + 7 and 9" I went into IPL mode. And now I can't go in the operating mode of the machine. After reading the forums, I understand that resets the settings of the machine. Can somebody tell me how to get in the work mode of the machine and where can I get the parameters on a fanuc 10m. Thank you.
Thread: Victor Fanuc 10m Parameters
Results 1 to 2 of 2
-
11-28-2016, 03:44 PM #1
Registered
- Join Date
- Nov 2016
- Posts
- 2
Victor Fanuc 10m Parameters
-
11-29-2016, 06:54 AM #2
Registered
- Join Date
- Dec 2009
- Posts
- 953
Re: Victor Fanuc 10m Parameters
if you have a lathe must be 10T(TURN) not 10M(MILL).
i can give you the parameters,i need the serial number of the machine and type.
my email is :[email protected]
Reply With QuoteSimilar Threads
-
Victor 4 Fanuc 10M
By vleisman in forum FanucReplies: 6Last Post: 08-09-2023, 04:30 AM -
Victor V center 4 10MA option parameters
By sisbir in forum FanucReplies: 27Last Post: 08-14-2020, 04:00 PM -
Victor 4 Fanuc 10M
By vleisman in forum South Africa Club HouseReplies: 1Last Post: 01-07-2016, 10:50 AM -
Victor 4 Fanuc 10M
By vleisman in forum FanucReplies: 0Last Post: 05-13-2015, 08:09 AM -
Victor VMC fanuc 10M
By Dheimification in forum DNC Problems and SolutionsReplies: 3Last Post: 11-14-2011, 09:35 AM
Tags for this Thread
Posting Permissions
