[microtrol]

Hi all,
Just looking to see if anyone has a PDF of the electrical wiring diagrams for a Bridgeport Interact 412 with the Heidenhain TNC151 control. We are planning to change the control over to a Fanuc 0i-FM control but it would be nice to see the I/O for the machine prior to tearing it down.
Thanks, Brandt

[webstooge]

Hi all,
Just looking to see if anyone has a PDF of the electrical wiring diagrams for a Bridgeport Interact 412 with the Heidenhain TNC151 control. We are planning to change the control over to a Fanuc 0i-FM control but it would be nice to see the I/O for the machine prior to tearing it down.
Thanks, Brandt

Take a look at the TNC 320. Much easier retrofit and a capable, reasonably priced control.

[microtrol]

Webstooge,
Thanks for the reply but this machine is actually going to be a training machine for our junior engineers to design and commissioning on Fanuc retrofits for our customers. I have figured out most of the wiring but it would be nice to have the prints just in case.
Brandt

[RMARCH]

I am not sure if these will help you or not .

[Eric]

I am not sure if these will help you or not .

Can you attach larger image files. These are very difficult to make out when I zoom in.

[mmcan2]

Do you have larger versions of these files? They are not legible and zooming in makes them more blurry. Thanks

[randykj]

Have you found what you need?