would any one help me setup my wireing i will post my breakout board
would any one help me setup my wireing i will post my breakout board
oky it was the wireing WRONG
on the Z i had A- and B+ RONG SO I CHANGED THEM AROUND NOW ITS WORKING BUT NOW WHEN I CHANGED THE REST AROUND IT JUST GAVE ME A BUNCH OF JUMPING SO I CHANGED THEM BACK AND IT WORKED BUT ACCORDING TO THE DYAGRAM IT SHOULD BE BLACK TO A+ GREEN to A- RED to B+ BLUE to B- ON THE X Y I REVERSED THE A- AND B+ BACK TO B+ AND A- NOW EVERY THANG IS WORKING IS THIS OKY
Wire is cheap I bought a bunch of colors and then when I need to trace it it is easy is your software set up neg /pos .