[gibson22]

would any one help me setup my wireing i will post my breakout board

[A_Camera]

would any one help me setup my wireing i will post my breakout board

OK, so what is the question? The driver you have is very easy to connect, but the picture of you wiring is very unclear. I don't know that BOB. Did you read the manual of the driver? It is pretty clear how to connect it.

[gibson22]

OK, so what is the question? The driver you have is very easy to connect, but the picture of you wiring is very unclear. I don't know that BOB. Did you read the manual of the driver? It is pretty clear how to connect it.

i did it by the manual....... going to rewire it today and give it a nother go and i got a nother break out board comeing ty for the reply will let u no ...

[gibson22]

oky it was the wireing WRONG
on the Z i had A- and B+ RONG SO I CHANGED THEM AROUND NOW ITS WORKING BUT NOW WHEN I CHANGED THE REST AROUND IT JUST GAVE ME A BUNCH OF JUMPING SO I CHANGED THEM BACK AND IT WORKED BUT ACCORDING TO THE DYAGRAM IT SHOULD BE BLACK TO A+ GREEN to A- RED to B+ BLUE to B- ON THE X Y I REVERSED THE A- AND B+ BACK TO B+ AND A- NOW EVERY THANG IS WORKING IS THIS OKY

[InMesh]

Wire is cheap I bought a bunch of colors and then when I need to trace it it is easy is your software set up neg /pos .