my lpt1 stays high from pin 2 to 9 :drowning:
Thread: lpt1 can,t get to work
Results 1 to 1 of 1
-
12-18-2016, 12:01 PM #1
Registered
- Join Date
- Nov 2010
- Posts
- 7
lpt1 can,t get to work
Reply With QuoteSimilar Threads
-
Mach3/Lpt1
By Brianne163 in forum DNC Problems and SolutionsReplies: 2Last Post: 05-01-2014, 04:07 AM -
plugging encoders directly into LPT1
By justCNCit in forum CNC Machine Related ElectronicsReplies: 14Last Post: 08-29-2009, 07:18 PM -
Trouble with output from Pin 2 of LPT1
By salvaCNC in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 02-04-2007, 12:17 PM -
Windows based laser engraver software - Hardwired to LPT1 - redirect output to file
By sidi_steve in forum DNC Problems and SolutionsReplies: 6Last Post: 05-09-2006, 03:52 PM -
The 10 or so, ground pins on the LPT1
By thuffner3 in forum CNC Machine Related ElectronicsReplies: 0Last Post: 02-09-2004, 01:37 PM
Tags for this Thread
Posting Permissions
