We have a Hypertherm Table with an edge controller and we are running into an odd issue. For some reason when you have to stop the program due to pierce issues for example, when you go forward on path and continue the program, the move speed occasionally changes on us. Some times it's zero, sometimes it's the faster cut speed in the program. If you don't catch it quickly, it can really make a mess. Has anyone else encountered this issue?
Results 1 to 2 of 2
-
12-21-2016, 11:27 PM #1
Registered
- Join Date
- Dec 2016
- Posts
- 1
Plasma Table Changing move speed after hitting Stop
-
03-19-2017, 10:31 AM #2
Registered
- Join Date
- Mar 2011
- Posts
- 39
Re: Plasma Table Changing move speed after hitting Stop
Yes. I've seen this issue on my Micro Edge. It seems that wherever the cursor is located at the time of the stop may change the value in that box. I cannot recreate the issue, it just seems to happen at random. I may be doing something that causes the value to change, but I'm not sure. I have not contacted Hypertherm support to ask them why.
Reply With QuoteSimilar Threads
-
Help! Mach 3 Won't Move my Stepper Motor - Emergency Stop Mode
By AntonCNC in forum Machines running Mach SoftwareReplies: 10Last Post: 03-08-2017, 02:38 AM -
Changing from tormach 770 high speed to low speed pulleys
By phoneman in forum SprutCAMReplies: 7Last Post: 12-07-2014, 03:23 PM -
How to stop reset button automatically changing G59 to G54
By kevinwd1 in forum FanucReplies: 6Last Post: 04-10-2014, 10:28 PM -
keeping the spindle from hitting the table
By devincox in forum Charter Oak Automation Support ForumReplies: 17Last Post: 08-19-2009, 11:18 PM -
CNC Plasma Table Speed Calculations
By Terry G in forum Waterjet General TopicsReplies: 13Last Post: 09-25-2006, 08:03 AM
Tags for this Thread
Posting Permissions
