Hello Guys,
Need some help! We have a Charmilles Robofil 310 and when we boot the machine it would only show the blue/gray screen with the F1, F2, F3 options. After a few attempts, then we received a message on the screen E0B P00?.
We were installing USB Emulator ad unable to get it going at the moment so we were going to come back to I later. After reconnecting the floppy drive, that is the message we keep getting. I have tried to reboot with the USB hooked back up disconnected the 3.5 Floppy and still the same issue.
Any help would be greatly appreciated?
Lance