Can I put a bare copper PCB on the plate of the 3d printer, and print a layer of plastic (pla, abs, or WHATEVER is used) directly to a bare copper board? I want to print a printed circuit board pattern, and etch-resist the board after print. If this is NOT possible, can I know why / what happens?
Results 1 to 12 of 12
Threaded View
-
01-06-2017, 08:56 AM #1
Registered
- Join Date
- Jul 2005
- Posts
- 261
Curious: PCB etching - use printed traces as resist
WWW.RAIDGEAR.NET - FFC cables, foam headset replacement parts, and other gadgets.
Reply With QuoteSimilar Threads
-
3d printhead for acid resist mask
By DrStein99 in forum PCB millingReplies: 7Last Post: 12-07-2016, 08:59 AM -
Print plastic traces on nlank copper clad for circuit board etch resist
By DrStein99 in forum 3D Printer / 3D Scanner DiscussionReplies: 0Last Post: 05-28-2014, 04:34 PM -
printing traces and drilling PCB'S
By jlnading in forum PCB millingReplies: 13Last Post: 07-16-2013, 12:43 AM -
Need a PCB with fine traces milled/made.
By yungblood in forum Employment OpportunityReplies: 3Last Post: 05-16-2010, 12:09 AM -
pcb-gcode. how to remove all copper other then traces
By disonance in forum PCB millingReplies: 7Last Post: 06-04-2009, 02:30 AM
Tags for this Thread
Posting Permissions
