[Erik D_lux]

I am looking for 200pcs total, 50pcs of each style.

Made from 6061. Raw finish is fine.

All the small holes are .120" but if it makes the job cheaper, .125" is good also.

The larger holes are for looks, .010" tolerance on them is fine, .002 +/- on the rest of the part. I dont care if these are milled or laser or whatever you like as long as the tolerance can be held.

These have been machined with a .109 EM in the past.

Attached is a dxf. All 4 different parts are approx 7.3" x 1.5", .125 thick.

I would really like to find a good mill guy to work with in the future. I have had a good lathe guy for years but seems finding a good mill guy has been really hard.


Please email [email protected] with quote and ETA. I would like these within 4 weeks if possible.

[Erik D_lux]

More DXF files

[ten4machining]

Sent an email with a quote.

[BIG IGG]

Email sent as well
:banana:

[Erik D_lux]

Job has been awarded. Thanks!