I switched on the mill a few days ago and got a bios error - not sure of exact words. Disc failure or disc error maybe. It gave me 3 options. I pressed on the highlighted one- Load optimum default.
This made no difference.
I then powered down the PC manually ( held the button in then released) and removed a USB stick which was connected.
I restarted the PC .
The Tormach Logo appeared, then screen displayed a new error message. which I have taken a photo of and attached.
Can any one please explain what has happened and how can it be fixed . ( PC was purchased with mill from Tormach)
I have contacted Tormach and as yet received no reply.
Many thanks,
John. UK