Ok, I have jumped neck deep into my first time in the CNC world. I bought a 6040 Chinese machine, and from what I read on here, I ordered a G540 at the same time. I never even plugged it in with the original electronics. Have the G540 up and running, but am stumped on the VFD that came with the machine and how to connect it to the 540. Will this need a relay for the VFD? I am not above replacing the VFD too at some point, just need to show the wife this thing actually works before I drop any more money into it. Including pics with this as well. The model number on the VFD is PRT-E1500W. Thanks.
The three wires you see connected on the left were connected to the Gecko. I have since disconnected them since I wasn't able to control the spindle from Mach3 that way. It could be that I haven't gotten everything set right in the software too though.