Originally Posted by
stuartpeet
Hi Rich.
We have now given up with the tria, both SCM and morbidelli do not have the complete parameter or PLC programme due to the age and version. I have opted to retrofit the machine to accommodate mach 3 software, I am in the early stages therefore still installing the hardware, this is being undertaken with a guy via the internet that has retrofitted many CNC machines by using mach 3. The cost will come in around £2000 to undertake this, well worth it as at least I will have a controller/software that is supported and will last for many years. This may be of interest, as a result of the retrofit I now have an ASPAN programme that I no longer use complete with dongle and fully functional. it is an old version but still useful and I have been informed by ASPAN it can be upgraded to the new version which is supported for £1500 if required. I am not sure if the programme is coded only to be used on my machine only you would need to find this out, however if it is of any use to you please contact me and we can discuss.
Stuart