[manishdev]

dear sir i got this error E44 hdlc response time-out error

in amada coma 567 plz help me what shoud be the problem

[deeps05]

Dear Sir,
Controller FANUC 04P ? If yes then check cable connections. or call me on +91 8149636586.

Regards
Deepak

[STLMachinist]

Most likely one of the MMC boards next to the CRT inside the cabinet.

E44 HDLC RESPONSE TIME-OUT ERROR
COMMUNICATION TO CNC WAS INTERRUPTED DURING COMMUNICATION INITIALIZATION
CHECK CNC POWER SUPPLY / REPLACE SUB PCB / REPLACE MMC I/F PCB / MEM PCB / MASTER PCB

[jorber]

Most likely one of the MMC boards next to the CRT inside the cabinet.

E44HDLC RESPONSE TIME-OUT ERROR
COMMUNICATION TO CNC WAS INTERRUPTED DURING COMMUNICATION INITIALIZATION
CHECK CNC POWER SUPPLY / REPLACE SUB PCB / REPLACE MMC I/F PCB / MEM PCB / MASTER PCB

I have this same E44, I did check the power supply, then do I need to replace randomly all PCB?


Sent from my iPhone using Tapatalk

[jorber]

Attachment 405728
That is what the screen shows



Sent from my iPhone using Tapatalk

[jorber]

Attachment 405728
Mr. Joe Can you help me in this one?



Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk