Quote Originally Posted by ger21 View Post
If it'll let you, I'd leave the B axis softlimits at 0, as the Y softlimits will take care of it. I downloaded your profile file, and the B axis softlimits ARE the same as the Y, so you must have changed it?
It was 25 in Mach 3. I must have thought it was wrong and changed it.

Quote Originally Posted by ger21 View Post
When using the ESS with Mach3, the kernel frequency is not used. It's configured in the ESS plugin.
Is 100k the correct setting for UCCNC?