I need to mill an aluminum box. 4x2x2(deep). Please let me know if you can do this, and how to arrange a quote. I have the complete solidworks database for this product.
Regards, Jim
Results 1 to 6 of 6
-
03-29-2006, 05:41 AM #1
Registered
- Join Date
- Mar 2006
- Posts
- 2
RFQ milling aluminum 25 pieces to start
-
03-29-2006, 01:15 PM #2
Registered
- Join Date
- Feb 2006
- Posts
- 196
Jim-
Before anyone can quote it, post your SolidWorks file and any requirements such as type of aluminum, finish, when you need them, etc...You could also just email the data to prospective vendors. Ous is [email protected]
-
03-29-2006, 02:57 PM #3
Registered
- Join Date
- Mar 2006
- Posts
- 2
will send database via email
I will send all information via email; please contact me at [email protected] with your email address/phone. Thanks, Jim
-
02-23-2007, 12:06 AM #4
Registered
- Join Date
- Feb 2007
- Posts
- 1
Jim, i can do this box. Ron Lamy 336.841.2201, [email protected]
Originally Posted by Jim Girardeau
-
02-23-2007, 12:38 AM #5
Registered
- Join Date
- Feb 2007
- Posts
- 60
post
Yo blueridgetool, after e-mailing them to send me their prints I noticed the date on the RFQ Post (( 3-28-2006 )), this leads me to believe that you stumbled on an old awarded post & I followed your lead.
WILLwork4money
-
02-23-2007, 04:25 PM #6
Monkeywrench Technician
- Join Date
- Jan 2004
- Posts
- 3154
Newbie (flame2)
www.integratedmechanical.ca
Reply With Quote
Posting Permissions
