586,094 active members*
4,090 visitors online*
Register for free
Login

Thread: sinumerik 810 GA3 reanimation after discharged battery

Results 1 to 2 of 2
  1. 02-22-2017, 11:10 AM #1
    Mariusz89
    Mariusz89 is offline Registered
    Join Date
    Feb 2017
    Posts
    1

    sinumerik 810 GA3 reanimation after discharged battery

    Hello

    I have Problem. I have old machine Peddinghaus FDB 1000/3 with software Sinumerik 810 GA3. The machine longest moment was don't use.
    Battery wass discharge. I change battery. On monitor show me community ORD 1 PLC-STOP. I understand lack date machine and Controller PLC, which I must new installed. I don,t have need date on other disk.

    My question. Do you have software controller PLC and speciffically to this machine and send me to e-mail.
    Regards
    Reply With Quote Reply With Quote
  2. 03-11-2017, 03:28 AM #2
    bin95
    bin95 is offline Member
    Join Date
    Apr 2006
    Posts
    19

    Re: sinumerik 810 GA3 reanimation after discharged battery

    Looks like it still has the operating system. To get the data back to default, see https://support.industry.siemens.com...tion_Lists.pdf
    If you want to load the operating system back in it you will need to contact your local siemens dealer or see https://mall.industry.siemens.com/go...PL&language=pl
    At siemens site you may browse other documents too.

    PLC Training Org.
    Thank you for your consideration.
    Don (Follow me) http://www.linkedin.com/in/bin95
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Sinumerik 840C, Sinumerik 840D
    By marek-vavra in forum SIEMENS -> Sinumerik 840C
    Replies: 3
    Last Post: 09-02-2022, 07:04 PM
  2. Centroid M-400 CMOS BATTERY LOW VOLTAGE FAULT- WHERE IS THE BATTERY?
    By Russ Shugg in forum Centroid CNC Control Products
    Replies: 15
    Last Post: 01-11-2014, 03:01 AM
  3. Sharp SV2412 "battery low fanuc side (replace battery with power on)" - HELP!
    By Gnome in forum Sharp CNC
    Replies: 2
    Last Post: 11-07-2013, 04:34 AM
  4. battery alm
    By Drye-123 in forum Fanuc
    Replies: 4
    Last Post: 12-18-2008, 03:26 PM
  5. Sinumerik 810m ga2 ram module battery question
    By jgriffith66 in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 11-26-2007, 08:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules