586,116 active members*
3,442 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Newbie: E100L Rs232c output of IGF files

Thread: Newbie: E100L Rs232c output of IGF files

Results 1 to 3 of 3
  1. 02-22-2017, 08:20 PM #1
    mjmabs
    mjmabs is offline Junior Member
    Join Date
    Feb 2017
    Posts
    1

    Newbie: E100L Rs232c output of IGF files

    Have a Okuma Captain-L370M with a OSP-E100L trying to setup RS232C input/output with Cimco DNC-Max v8.

    Have been able to successfully offload a .min file but when I try to offload a .IGF file I get "Error 9071 A number of a letter in 1line are over 155. '0000000000000.."

    I have tried changing the Tape Parameters, CN0: settings but nothing seems to correct issue, can someone provide some assistance or guidance.
    Reply With Quote Reply With Quote
  2. 02-23-2017, 06:52 AM #2
    kurmay
    kurmay is online now Member
    Join Date
    Aug 2011
    Posts
    419

    Re: Newbie: E100L Rs232c output of IGF files

    igf files are binary files and maybe dnc not permitted transfer
    "Imagination is more important than knowledge."
    Reply With Quote Reply With Quote
  3. 02-24-2017, 06:56 PM #3
    OkumaWiz
    OkumaWiz is offline Registered
    Send a message via AIM to OkumaWiz
    Join Date
    Apr 2009
    Posts
    1262

    Re: Newbie: E100L Rs232c output of IGF files

    Kurmay is correct. IGF files contain a larger character set than ASCII code can handle so they cannot be transferred via RS232. Not to DOS floppies either. They must be offloaded only in Okuma format onto a floppy.

    Best regards,
    Experience is what you get just after you needed it.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules